mini elos- bubble problems

Please, have anyone a solution for the micro bubbles?

HELP ME ! my tank have 80 days and they still there.....

Hi fcom may you explain better your problem? Have you some picture to show?

Thanks

Danilo

My today photos:





[b]

double-click in photo for larger view.
Tks

Hi fcom

How many cm of water do you have into the sump?
Have you try to lower the water flow sump-tank?

My I have another pics where I can see your sump please?

Thanks

There is a video. The compressor of the video for youtube, make it small amount, but at the end, you can see it,



https://www.youtube.com/watch?v=vQBwMRw9WlU


Dani, I already try to use the ramp of the sump but it does not work.

***dani*** wrote:

Hi fcom

How many cm of water do you have into the sump?
Have you try to lower the water flow sump-tank?

My I have another pics where I can see your sump please?

Thanks

You can see some photos here:


http://www.aquahobby.com/phpBB2/viewtopic.php?t=53467&postdays=0&postorder=asc&start=0

check the elos forum on reef central as well Jesse has posted a fix for this as well.

I don't see the water level into the sump, you have to try to higher the water level.

Where do the bubbles come? From Skimmer or from the return pump?

But in any case I need to see a sump picture where I can see the water level.

Hi, today i take some pictures.
I already try the nivel up and down.

Right now it's have 13,8cm

here some photos:
[/url
[url=https://servimg.com/view/13730586/4]

I would try to have almost 16-18-20 cm of water level.

Please try.

Danilo

Hi, after several tests,

Iput a shark bag into the water that came from the aquarium to the sump. Problem solved.

Now i want to know how i can make a change to take out the bag .

I am a little hurry about clean the bag once a week.

Tks

Hi, fcom, you can watch also to this pictures to lower the noise.

It's an italian article about it, but I think the pics are self-explanatory.

http://www.acquaportal.it/Nanoportal/Articoli/fai_da_te/MSEsilenziarote/

Hi dani

I'm french and i have a mini, my problem wasn't with microbubbles but it was noisy.
For the moment, I have put a small tube (12 mm) in the entrance. Where found this peace?

Thanks a lot and excuse for y french accent

Hi frenchreef you can watch the solution above that is to lower the noise, and you can lower the pump flow a bit...